Using the pipe instead of a rod not in the NEC code?
In this area for electrical ground from the electric service is a flat
plate, no rod. The rod is no longer acceptable.
Chris opr VE7HCB
At 11:02 PM 2002-04-17 -0400, Bill Otten wrote:
>.....with the only drawback being that it's not NEC code, which can and
>probably would be a factor if an insurance claim has to be filed.
>
>Bill KC9CS
>
>
>Subject: Re: [Towertalk] driving ground rods
>
>
> > Use 10 foot lengths of copper pipe in place of rod. Clamp a garden hose to
> > one end and hammer the other end partially closed to cause a water jet and
> > simply jet the pipe into the ground. It is easy and the pipe is cheaper
>than
> > rod, about $5 a piece.
> >
> > Bruce AA4Z
>
>
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
|