Try www.solder-it.com
73
Sam, W5LU
>From: K7LXC@aol.com
>To: petrich@u.washington.edu, towertalk@contesting.com
>Subject: Re: [Towertalk] SOLDER TO ALUMINUM
To: <towertalk@contesting.com>
>Date: Mon, 22 Apr 2002 19:04:48 EDT
>
>In a message dated 4/22/02 11:24:12 AM Pacific Daylight Time,
>petrich@u.washington.edu writes:
>
> > Can anyone recommend a method to solder aluminum to aluminum and
>copper
> > to aluminum? Am experimenting with a new antenna.
> >
> > Once I successfully soldered brass mesh over a vent hole in an
>aluminum
> > chassis for a high power UHF amplifier. Cannot recall how I did that.
>Am
> > interested in a soldering method that will improve the electrical
> > conductivity of the connections over and above that possible using the
>usual
> > clamping methods.
>
> There's a guy that's at the NW Division Convention in Seaside, OR,
>every
>year that has a fascinating product that REALLY DOES solder aluminum. I've
>never seen anything else even close. The Convention is next month.
>
>Cheers,
>Steve K7LXC
>TOWER TECH
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
|