3M-Scotch-Brite
Try any home center, Lowe's Home Depot etc. I buy them all the time to clean
the carbon out of my skeet chokes. I'm using them now to clean up the legs
on an old Universal Tower.
Larry WA2SRY
----- Original Message -----
From: "Jimmy Weierich" <kg2au@stny.rr.com>
To: <towertalk@contesting.com>
Sent: Saturday, November 23, 2002 1:21 PM
Subject: Re: [Towertalk] Cleaning Aluminium. Thanks
> These pads are widely used in the metalworking industry and are made
> in a variety of grits by 3M (Scotch-Brite) and other manufacturers.
>
> They are available from industrial supply houses such as
> McMaster-Carr and Grainger as well as metalworking supply houses such
> as J&L, MSC and Enco.
>
> Try searching any such site for "abrasive hand pads".
>
>
> >I would never use steel wool except as a last resort - it deposits steel
> >shavings all over everything and you can never really clean it all off.
> >These shavings will rust and perhaps cause dissimilar metal issues.
> >
> >I use Scotch brite pads (assuming you can get them).
> >
> >73 Mike N2MG
>
> --
> Jimmy Weierich, K2LV, ex KG2AU <kg2au@stny.rr.com>
> Vestal, NY USA FN12xa
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|