Towertalk
[Top] [All Lists]

Re: [TowerTalk] Making rotator loops separate

To: mcduffie@actcom.net, towertalk@contesting.com
Subject: Re: [TowerTalk] Making rotator loops separate
From: K7LXC@aol.com
Date: Sun, 31 Aug 2003 13:57:38 EDT
List-post: <mailto:towertalk@contesting.com>
In a message dated 8/31/03 10:36:37 AM Pacific Daylight Time, 
mcduffie@actcom.net writes:

> > Pl-259's are notorious for coming loose anyway, and in the loop 
environment
>  > you're just asking for trouble.
>  
>  I've NEVER had a PL come loose on me, even the ones that weren't
>  taped.  I put them on as tight as my hands will do it without tools,
>  and that's it.  Properly installed, they shouldn't come loose with
>  layers of tape over them anyway.

    Well, you've been lucky. Hand-tight is NOT recommended. Use the 2-plier 
technique to 'gently' seat them with a barrel connector and 1-plier on baluns, 
etc. 

Cheers,
Steve     K7LXC
TOWER TECH -
Professional tower services for commercial and amateur 
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>