I recently purchased used a Mosley TA-40KR 40 meter
add-on kit for my TA-53m yagi ( no manual ). I tried
to fit the kit onto the ends of my "Blue Radiator" by
removing the original tip from the TA-53m and
replacing it with the TA-40KR end and found that both
are the same size ( 3/4 inch fittings )!!!
Am I missing a coupler that attaches these two ends
together ??
Both ends of each side of the kit contain a tapered
section which can only accept a 5/8 section. The
problem is i need the kit to fit into something
alittle smaller or larger.
Newly subscribed to the reflector,
Jeff K7XQ
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|