If you have a prob with this URL, go here .. Mark, AA6DX
http://tinyurl.com/2lwyc
----- Original Message -----
From: "Al, N6TA" <n6ta@arrl.net>
To: "Kelly Taylor" <ve4xt@mb.sympatico.ca>; <towertalk@contesting.com>
Sent: Thursday, April 29, 2004 4:30 PM
Subject: [TowerTalk] How to install the PL-259, link FYI
> Try this one out
>
>
http://www.seed-solutions.com/gregordy/Amateur%20Radio/Experimentation/Solde
> rCoax.htm
>
>
> Al
> N6TA
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of Kelly Taylor
> Sent: Wednesday, April 28, 2004 18:18
> To: towertalk@contesting.com
> Subject: [TowerTalk] Co-ax, and didn't K7LXC say 'no more BPL?'
>
>
> Regarding coaxial cable: unless I had extremely long runs, or had excess
> monetary capacity, I think it's pretty hard to beat brand-name RG-213 for
> most HF applications. Flexible, UV resistant, centre conductor not prone
to
> migration, solid dielectric to avoid water wicking to the extent of 9913
and
> once you get to the top of the tower, no need to worry about pigtails.
I'll
> admit that the longer the run, the greater the case for more expensive
> cable.
>
> Be that as it may, you can always spend more money if you want, and far be
> it for me to restrict the economics of the coaxial cable industry. But if
> you do spend more, and end up with inflexible cable, I wouldn't worry for
> one moment about any insertion loss by having to go to a pigtail. Just do
> the connectors right and be happy knowing you won't be able to tell the
> difference. The fraction of a dB lost to the connector is more than paid
for
> by increased reliability and the lower loss of the main cable run.
>
> I'd apply the same logic to VHF and UHF, I'd just make sure the choice of
> connectors was correct.
>
> There was a link a while back to an excellent treatise on PL-259
> installation. Wish I still had it, but if I need it, I know it's in the
> archives somewhere. The main premise was using the right tools and butane
> torches to get enough heat into the connector body quickly enough to avoid
> melting things. And leaving plenty of slack for the inevitable time you
nick
> the conductor, in which case just chop it off and start over.
>
> 73, kelly
> ve4xt
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.657 / Virus Database: 422 - Release Date: 4/13/2004
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.657 / Virus Database: 422 - Release Date: 4/13/2004
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|