Re: [TowerTalk] Conduit ends?

["Tower (K8RI)" <tower@rogerhalstead.com>]

----- Original Message ----- 
From: "Paul Ash" <bluesdude@cfl.rr.com>
To: <towertalk@contesting.com>
Sent: Monday, November 01, 2004 8:11 PM
Subject: [TowerTalk] Conduit ends?


Hello All,

I have been considering running my coax, antenna
selector control cable and rotor control cable through a 3"-4"
inch conduit. I would like to get some opinions on the best
way to handle the ends that are projecting out of the ground.
I did read a former thread that talked about two 90 deg bends

This is what I did for the weather. Then I sealed the conduit in the box 
with the soft/flexible foam.

http://www.rogerhalstead.com/ham_files/cablebox.htm

Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com
(sounds good for water/rain.) what about bugs/rodents/varmints etc...
Anyone have a good idea how to seal the ends that would still provide
passage of the cables and could be removed with a minimum of effort
whenever it comes time to replace or add to the cables?

Thanks!

73,

Paul W4QG
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk