[TowerTalk] Emoto 1300SMAX Rotor

["Brad Pioveson W9FX" <w9fx@neondsl.com>]

Greetings, fellow TowerTalkians.  I have an Emoto 1300SMAX rotor and 
controller on my bench for repairs for unknown maladies ('it doesn't work'). 
Info on this rotor is a bit sparse - I have what purports to be a photocopy 
of a manual, but, that sadly lacks much needed info.

Anybody have any doc's on these critters?  Anybody know of a parts 
distributor?  Or, does anybody simply have any experience with these they'd 
be willing to share?  So far, I know that the grease in this monster is the 
consistency of 5 minute epoxy after 10 minutes of UV exposure and that 
there's a motor run cap buried in the motor housing that is shot.  The AC 
motor, which wants to see about 100VAC, couldn't begin to turn the 
gears...there's simply not enough torque to break the grease adhesion!

Thanks for any help y'all can offer.

73

Brad Pioveson, W9FX
FX Rotor Works
www.fxrotorworks.com 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk