Re: [TowerTalk] Pull Down Cables

[Ken Beals <k6mr@pacbell.net>]

The other way I've seen this done was on the Tri-Ex Sky Needles.  They 
had one continuous cable, driven by a friction drive arrangement.  Sort 
of the same thing, except that the cable did not terminate on the drum.  
The drum had a fancy machined surface that would grip the cable to drive 
it in the proper direction.  As I remember it, the cable looped around 
the drum several times and a set of spring loaded tensioner pulleys 
kept  everything tight.  I think the advantage was that you didn't have 
to worry about the cables wrapping up on themselves. 

Ken K6MR

Pat Barthelow wrote:

> First, a Million Thanks to those TT'ians who are valuable helpers in 
> getting the
> old tower trailer tower up again....
>
> A question:
> Some towers implement a pull down function.  Does this function 
> require a second cable leaving the lift winch, in the 'opposite' sense 
> than the lift cable?   Or are there other ways to implement the pull 
> down function?
>
> 73, DX, de Pat Barthelow  AA6EG
> (831) 646-0388    aa6eg@hotmail.com
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless Weather Stations", and lot's more.  Call Toll Free, 
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk