Looking over the huge amount of post-occupancy work that is
ahead with our new house I simply will not have time to create
my custom Rohn 25 tiltover.
Full or partial swap (no cash) for a really solid complete
50+' tiltover or 55-60' of real clean Rohn 45 or 55 (must
include the loan of a gin pole, some installation help, and
hopefully a strong 15-20 foot mast).
The Rohn 45/55 would be installed without guys hosting a Force 12
C3SS, a multiband (6/2/440) vertical, and probably some sort of
VHF and/or UHF beam.
Here is what I have:
110 feet of Rohn 25 straight sections (mostly real clean, a few with
minor discoloration).
Rohn tiltover slab-mount base plate-hinge assembly.
Two taper-top Rohn 25 sections approx. 9' each (one is sound,
the other has a freeze breach in one leg but is otherwise OK)
Two rotor mount plates.
Two approx. 4' partial straight sections for setting in base.
Two side-mount arms.
Misc. additional hardware.
Located in Pasco County, Florida a little north of Tampa.
--
Thanks! & 73, doc kd4e
|_|___|_|
| | & | |
{|
/\ {|
/ \ {|
/ \ {|
/ @ \ {|
| |~_|~~~~|
| -| | |
============\ # West Central Florida
KD4E ==============================
http://bibleseven.com/steelhouse1.html
Ham PC = 100% Linux Novell-Suse 9.2
Halli, Heathkit, Homebrew, MFJ, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|