At 04:47 2005-04-05, KT2Q wrote:
>Any additional suggestions on mast mounting distance for monobanders would
>be greatly appreciated.
I have one data point to contribute. From 1986 until 2000 I had a Cushcraft
20-4CD at 122 feet (one foot over the top plate on my Rohn 25 tower) and a
Cushcraft 15-4CD five (5) feet above it, at 127 feet over extremely flat
farmland in upstate NY. The spacing between the beams was set very
"scientifically" -- namely, by how far I could reach to tighten U-bolts on the
15-meter bracket while standing on the tower top plate and hanging on to the
mast for dear life with one arm and my climbing belt.
It was the first time in my life that I felt like I had a "real signal" on 20
meters. And despite my initial misgivings that the 15-meter beam might be "too
high", that antenna was a "band opener" and "band closer" -- something I had
never owned previously.
Yeah, the beams were too close together. Yeah, the SWRs weren't exactly
perfect (but that's what the pi-network on my SB-220 is for). Yeah, maybe my
F/B on one or both beams was degraded (but it sure wasn't obvious to me).
Yeah, if I'd had EZNEC or something similar back then, I might have paralyzed
myself into spending the first two years analyzing the optimum spacing instead
of getting the antennas up and playing. But, you know what? Those beams
WORKED!!!!
I'm sure there ARE optimum spacings for stacked monobanders. And the
differences are probably worth spending some time on in multi-tower super
stations with 22-foot masts and climbing steps. But if you can't optimize, it
isn't the end of the world, as I found out, to my great delight.
GL Tony.
Bud, W2RU
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|