GM3SEK added:
> > If you are close to the antenna, there numerous potential culprits -
> >even ones you might not expect.
>
>Build or buy a clip-on RF current meter. Clip it over *every* cable
>coming into the shack, and get yourself some real numbers. It's really
>the only way to know where the problems are coming from, and how well
>your solutions are working.
>
>The meter doesn't need to be calibrated - "percent full scale" is fine
>for RFI troubleshooting.
Good point, though being so close I can get away with just
doing things to suspect cables, as it's bound to help.
Because I can't properly insulate the base of the roof tower &
it's counterpoise can move around, the situation changes &
Sod's Law has it I have to find something to work when I
QSY to 80 in the middle of a contest, so in a way the trial &
error way has its advantages for me.
73, VR2BrettGraham
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|