Towertalk
[Top] [All Lists]

Re: [TowerTalk] Concrete Fiber

To: "'Doug Rehman'" <rehman@surveil.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Concrete Fiber
From: "RJD" <nj9k@wi.rr.com>
Date: Tue, 18 Oct 2005 00:42:09 -0000
List-post: <mailto:towertalk@contesting.com>
My antennas/tower took a glancing blow of lightning back in 2000 on the Sunday
night just back from Dayton and the block displayed no damage. I also have my
rebar welded as a cage inside the 5x5x8 hole. No problem so far.

-----Original Message-----
From: towertalk-bounces@contesting.com [mailto:towertalk-bounces@contesting.com]
On Behalf Of Doug Rehman
Sent: Tuesday, October 18, 2005 00:33
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Concrete Fiber

Thanks to everyone for their comments and experiences.

I decided to not use the fiber because of lightning concerns. My tower base
is a welded rebar cage (Tri-Ex LM-354HDSP), so the base will act as a Ufer
ground bonded to the main grounding system.

I couldn't find any literature about what happens to the fibers if the tower
takes a hit and the concrete conducts some serious current. While nothing
may happen, I decided not to gamble on a complete unknown. It would make an
interesting research project though.

Doug
K4DDR


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>