Use the resistance chart and voltage chart in the manual to make sure you don't
have a wiring problem before you go to the trouble of removing the rotor. The
resistance measurements are made in the shack, after removing the wires from
the control box. The voltage measurements are made at the rotor, with someone
else working the control box in the shack. You should also first measure the
voltages at the control box to make sure the problem isn't in the box.
73/Jon AA1K
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|