Dino:
Thanks for the very interesting photo, which raises a few questions:
1. What are the pairs of loops at the base? Torroidal transformers for the
feedlines?
2. Is that a pier-pin base at the narrow/waist of the two insulators? Or is
it a solid casting? If pier-pin, how far up the tower is the first guy point?
Or are the castings locked together somehow?
Inquiring minds want to know. Thanks
73 de
Gene Smar AD3F
> See here...
>
> http://www.earthsignals.com/Collins/0020/0008_1.jpg
>
> -----Original Message-----
>
> Medium wave bc stations routinely rely on their radial system for lighting
> protection (among other things). A pair of electrodes with a roughly 1/2
> inch air gap is a standard component on their towers, one side bonded to the
> hot tower; the other on the base which is bonded to 4 to 6 inch wide cu
> straps going down the exposed sides of the base pier to the counterpoise
> screen and radials.
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
> and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
