Towertalk
[Top] [All Lists]

Re: [TowerTalk] Switchable Polarization Delta Loop

To: k6zz@ccis.com, towertalk@contesting.com
Subject: Re: [TowerTalk] Switchable Polarization Delta Loop
From: "George P." <ab2kc@optonline.net>
Date: Tue, 09 Jan 2007 20:52:01 -0500
List-post: <mailto:towertalk@contesting.com>
Gents,
I have dual polarization on my 10 meter quad. Should be the same for an 80M. 
In order for it to work, each feedpoint MUST be gamma matched AND choked off 
with a 1:1 balun (coiled coax works, but lots needed for a 80M freq). If you 
don't do it this way, the unused feedline will load the loop, an never work. 
I spent a few months perfecting it. When done, you can try something really 
interesting by feed both feedpoints with one  90 degrees different to obtain 
circular polarization... reduces cross polarization QSB somewhat like 
diversity receiving.
George AB2KC

----- Original Message ----- 
From: "Bob Selbrede, K6ZZ" <k6zz@ccis.com>
To: <towertalk@contesting.com>
Sent: Monday, January 08, 2007 10:56 PM
Subject: [TowerTalk] Switchable Polarization Delta Loop


> Has anyone built a switchable feed system for a full wave
> 80M delta loop that would allow feeding it 1/4 wave down
> from the apex for vertical polarization and also in the
> middle of the baseline for horizontal polarization?  It
> seems like a good way to maximize a delta loop for both DX
> work and closer-in contesting applications.
>
> 73, Bob K6ZZ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>