I use a Yaesu G1000DXA to rotate a F12 C-4XL at 152 feet. It has been up 3
years. No problems so far.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of mryan001
Sent: Monday, March 12, 2007 11:42 AM
To: k2xx@swva.net; towertalk@contesting.com
Subject: Re: [TowerTalk] 4 Element Steppir and T2X
I would like to further examine the rotor question once Joe's question has
been satisfied. Is anyone using a Yaesu 1000 rotor or Yaesu rotors in
general and if so what are your impressions, better or worse, pros and cons
as opposed to the T2X? - thanks... - Mike
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Joe Giacobello
Sent: Monday, March 12, 2007 12:31 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 4 Element Steppir and T2X
Is anyone turning a 4 element Steppir with a T2X? If so, has performance
been satisfactory.? Any problems in high winds, etc.?
73, Joe
K2XX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|