In a message dated 4/12/2007 8:45:59 A.M. Pacific Daylight Time,
edlgal@earthlink.net writes:
> I have a HDX-555 with the continuous cable running through a multiple
pulley
assembly motor drive, no cable drum. Any thoughts on the use of a cable lub
that might cause slippage of the cable with respect to the pulley assembly?
I doubt that you'll see any slippage - there's a bunch of tension on the
cables plus there's a spring-loaded tensioner that you can adjust.
The cable lube is for all moving cables so I'd suggest using it.
Cheers,
Steve K7LXC
TOWER TECH
************************************** See what's free at http://www.aol.com.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|