Towertalk
[Top] [All Lists]

[TowerTalk] US Tower HDX 555 Tower Cables

To: towertalk@contesting.com (Towertalk)
Subject: [TowerTalk] US Tower HDX 555 Tower Cables
From: jcowens1@comcast.net
Date: Mon, 09 Apr 2007 17:50:02 +0000
List-post: <mailto:towertalk@contesting.com>
Phil:

If your tower is the motor driven type (HDX-555MDPL), I have the 72 foot 
version of that tower. I have also wanted to change out my cables as they are 
14 years old now, but in apparently good shape. I watch them very closely, 
lubricate them with wire rope lube, and oil the pulleys at least 3 times per 
year. I think the pulleys are the weak link on those towers. The wire rope lube 
is something everyone should use on tower cables as it penetrates all the way 
through the cables and greatly extends their life. One application lasts for 
very many years. 

I don't want to tilt the tower over to the ground to change out my cables as 
taking all of the antennas off is a big chore. I also do not own one of the US 
Tower lowering/raising winches.  I put this same question on this reflector a 
couple of years ago and got only one response from a ham in CA. He does this 
kind of work for pay, but said if you block every section of the tower to get 
the weight off them and prevent them from getting free when you remove the old 
cables, you can replace them that way with the tower vertical. I had planned on 
purchasing the cable set from US Tower soon and start looking into doing it 
that way. I had planned on attaching each new cable to the end of the old one 
and then pull them through for the replacement. Lots of pictures and sketches 
of the existing setup will precede any replacement activities. 

It seems to me that all of this is possible if you are very careful. If you are 
going to go ahead with this soon, I hope we can keep in touch so that I can 
learn from your experiences. Gene's (K2QMD) comments seem spot on to me and I 
wish you luck. I know it has been done successfully before. I know I can't 
afford to transport someone from CA to do it for me. 

John Owens - N7TK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>