Hi Charles et all
below is a link that I use for waterproof enclosures for wireless
installs. The boxes are NEMA4 , a little expensive, the largest box with
a non powered interior is about $250...
hope this helps,,
http://www.hyperlinktech.com/web/nema_enclosures.php
Bob Smith NA6T
Bob Smith
Robert Smith Consulting
"Wireless Installations -- Government, Businesses & ISP's"
F.C.C. Licensed-Commercial & Amateur Services
A.R.S NA6T
ARRL Life Member
1-707-964-4931 w/answering machine
Fort Bragg, California 95437
"On The Air-Conditioned Mendocino Coast, In REAL Northern California"
No trees were destroyed in the sending of this message.
However, a large number of electrons were terribly inconvenienced.
------------------------------
Message: 10
Date: Wed, 16 Jan 2008 06:33:22 -0500
From: "Charles Reiche" <reichec@verizon.net>
Subject: [TowerTalk] Base of tower waterproof enclosure
To: <TowerTalk@contesting.com>
Message-ID: <001701c85833$9a664870$0201a8c0@desk>
Content-Type: text/plain; charset="iso-8859-1"
Im having a bear of a time searching on ebay for a telecom style
waterproof enclosure box that I could mount at the base of my tower
and use as a junction box for any coaxes running to/from the
tower. I saw one at a local club's auction and now I am kicking
myself for not bidding $25!!! This box looked to be injection
molded plastic with pem nut style threaded inserts so you could mount
it to things and mount things inside it. The size was about 12" wide
20" high and 10" deep. I would even go for a bigger box that coule be
mounted to some 4x4s concreted into the ground next to the tower.
Any help or ideas would be much appreciated.
Charles Reiche
N3CRT
------------------------------
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|