Towertalk
[Top] [All Lists]

[TowerTalk] RG-6 connector issues/ rcv array

To: <cq-contest@contesting.com>, <towertalk@contesting.com>,<topband@contesting.com>
Subject: [TowerTalk] RG-6 connector issues/ rcv array
From: "Mike Fatchett W0MU" <w0mu@w0mu.com>
Date: Fri, 18 Jan 2008 15:45:52 -0700
List-post: <mailto:towertalk@contesting.com>
Just a heads up.  I was having some problems with my 4sq receiving array and
found that the coax was pulling back from the connectors so that there was
no contact being made.  These were on high quality cable and the compression
connectors.  I built this antenna when it was warm.  It is now very cold and
been below zero.  I wonder if that has anything to do with this issue.  

Hopefully now I will see some better performance out of the array.

I also found that one of my ground had been removed, probably by the horses.


Mike W0MU

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>