Towertalk
[Top] [All Lists]

Re: [TowerTalk] whole house surge protectors

To: "'Tower Talk List'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] whole house surge protectors
From: "Mike" <noddy1211@sbcglobal.net>
Date: Tue, 15 Apr 2008 18:25:22 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I see there is a "whole House" Surge protector at Harbor Freight LOT NO.
96822 on sale for 99 bucks, says it is good up to 70kA with lifetime
warranty up to $25,000.

Mike, K6BR

-----Original Message-----
 Subject: Re: [TowerTalk] whole house surge protectors

Jim and fellow Tower Talk members:

That message is kind of weird because I don't even use
the WW5L@gte.net address to send e-mails and haven't
in many months since I switched from dialup to DSL.  

I wonder why if you got it through the list and I
didn't where the problem could be?  I use McAfee
internet suite protection and it checks all my files
every night about 3 a.m. CDT, plus its set to auto
update my AV files too.  

The mysteries of the internet never cease.

73 de Tom, WW5L


--- Jim Lux <jimlux@earthlink.net> wrote:

> Tom Anderson wrote:
> > Jim and fellow tower talk members:
> > 
> > I'm in the process of having a 220 line run into
> the shack for a new 
> > Alpha 9500 amp my XYL and I picked up at the plant
> in Boulder a month 
> > ago.  Still waiting on the electrician showing up
> though.
> > 
> > While I had him on the phone I asked him (and yes
> I've known him for 
> > years (I was his son's Eagle Scout advisor) and
> he's done work for me 
> > before and does a lot of commercial work near us)
> about a whole house 
> > protector and in his opinion he felt a good
> individual unit for the 
> > plugs and equipment you wanted to protect was
> better than a whole house 
> > protector. He said many strikes, surges, etc. come
> into the house via 
> > phone lines, TV cable, satellite dishes, etc. and
> often bypass the whole 
> > house protector before getting into the home
> electrical system, which is 
> > why he prefers good single unit protectors when
> needed.
> 
> Not to be argumentative, but it would seem that the
> peer-reviewed 
> transient protection literature doesn't agree with
> the single unit 
> protection philosophy.
> (i.e. things that aren't  sales material or field
> application guidelines 
> from one company or another.. but stuff that has
> been independently 
> produced, or at least reviewed by folks without a
> financial or other 
> interest.  Sure, the guys from Erico publish papers
> on transient 
> suppression, and Erico sells products that do this,
> but the journal's 
> pre-publication review process generally makes sure
> that 2 or 3 other 
> folks take a look at it and make sure it's not all
> bushwa.)
> 
> 
> Your friend is right that lots of transients come in
> other ways, which 
> is why you need protection on *all* of them, and why
> everyone is so 
> obsessed with all those "bonding" rules.  However,
> there's a whole raft 
> of reasons why protection at the entrance is needed,
> and preferred, and 
> which should be properly coordinated with the
> downstream protection.
> 
> The guidelines for things like safety critical
> installations (e.g. the 
> FAA guidelines and DoD guidelines) all talk about
> transient protection 
> at the service entrance, but make little or no
> mention of "point of use" 
> protection.
> 
> Also, a lot of protection devices get a lot of their
> protection ability 
> by absorbing the transient (and getting
> spectacularly destroyed in the 
> process).  I think I'd rather have the spectacular
> failure out by the 
> meter, rather than on some plugstrip behind the
> desk.
> 
> 
> Really, the only hazard that point of use protection
> protects against is 
> a transient being induced in your house wiring
> closer to the equipment 
> than to the service entrance, because of the time
> delays involved. 
> (transients from outside, which are MUCH more
> common, get suppressed at 
> the service entrance) Or, if you have something in
> your house that puts 
> big transients on the power wiring (like that 1kW
> tesla coil you fire up 
> in the garage.. been there, done that, cooked my
> garage door opener and 
> a UPS.)
> 
> 
>   Of course, a decent series mode suppressor (i.e. a
> LC low pass filter) 
> will solve that problem.  Most modern electronic
> equipment already has 
> fairly decent low pass input filters on the AC line
> connection (to 
> prevent signals inside the box from coming out and
> creating EMI havoc), 
> so the sub microsecond transient resulting from that
> spurious induced 
> voltage, and reflecting back from the clamp will get
> smoothed out by the 
> filter to a level that is lower than the damage
> threshold for your device.
> 
> 
> 
> For folks wanting to spend some time and about $20,
> get the book by 
> Standler on overvoltage protection. (google standler
> overvoltage and 
> you'll probably find it) He's got all the data, the
> impulse waveforms, 
> the theory of what works and what doesn't.  His
> website also has some 
> info.  I can't recall which off hand, but in one
> place or the other, he 
> talks about the UL1449 standards, and the problem
> with "joule ratings" 
> and "clipping voltage".
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>