On 08/17/08 02:10 pm Artmouton wrote:
> I have hammered in two 8' copper ground rods.
> Will probably do two more later - they ain't cheap and not easy (although we
> are all dirt and gumbo mud here in South Louisiana.
>
> I now need to attach them to tower base.
>
> I have some coax type shield or some very large wire.
> Which one would be best?
>
> Then how to connect to ground rod - dissimilar metal connector?
>
> How to connect to tower - Rohn 55G.
> Prior owner had painted it.
> I will brush off paint area at connection point but do not want to destroy
> the coating - so how deep and how to connect to the tower leg?
I used #4 insulated stranded copper wire with bronze clamps (such as are
available at Lowe's or Home Depot) on the tower legs but separated by a
layer of stainless steel cut from a hose clamp. "Acorn" clamps (also
from Lowe's or HD) at the ground rod.
73
Alan NV8A
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|