Towertalk
[Top] [All Lists]

Re: [TowerTalk] Bracketed Rohn 25G Concrete Base Size: Thanks to All

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Bracketed Rohn 25G Concrete Base Size: Thanks to All
From: Jeff Stevens <jeff@mossycup.com>
Date: Thu, 28 Aug 2008 23:35:39 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks to everyone who responded to my query.  It turns out what I'm
looking for is indeed in the 2004 version of the Rohn catalog -- page
108.

Thanks again!

-Jeff
W7WWA

On Thu, 2008-08-28 at 14:42 -0700, Jeff Stevens wrote:
> Does anyone have a copy of drawing C850506?  It provides the concrete
> base dimensions for Rohn 25 bracketed installations.  It's nowhere to be
> found in the most recent catalog nor is there anything else that is
> specific to concrete bases for bracketed installations.
> 
> My plan is to go with the foundation required by an equivalent guyed
> tower (actually I'm going with one size larger for a number of reasons).
> This base, I believe, is a bit larger than what the drawing in question
> requires, however I need still need a copy of it to verify.
> Alternatively, maybe I overlooked something in the current catalog.
> 
> For reference, the total height will be 28', bracket will be at 16' and
> the mast will hold beams for 6m, 2m, and 70cm.
> 
> If anyone can send me a copy of C850506 it would be very appreciated!
> 
> -Jeff
> W7WWA 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>