Towertalk
[Top] [All Lists]

Re: [TowerTalk] small Rohn parts

To: STEPHEN L SALA <k7awb@msn.com>
Subject: Re: [TowerTalk] small Rohn parts
From: Mike <nf4l@nf4l.com>
Date: Tue, 09 Sep 2008 08:26:08 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
STEPHEN L SALA wrote:
> I called Rohn today and asked where to buy their small parts such as U-bolts 
> and palnuts.  They said they had a $300 minimum charge so good luck.  I asked 
> them if any of their dealers specialized in small part sales and the Proj 
> Manager did not know.  I have a Rohn 45 rotator plate AS455 which I have 
> misplaced the 6 U-bolts.  I cannot find the exact size in McMaster Carr and 
> none locally.  Does anyone know of a Rohn parts dealer?  Texas Towers said 
> they only sell what is on their web page.  
>  
> Stephen L. Sala (Steve) K7AWB Nine Mile Falls, WA DN17es
If you can't find them at any of the above spots, U-bolts are fairly 
easy to bend from a length of all-thread rod. I've used stainless steel 
from Home Depot.
73,
Mike NF4L
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>