Towertalk
[Top] [All Lists]

Re: [TowerTalk] Springs for erecting loops nd dipoles

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Springs for erecting loops nd dipoles
From: Doug Faunt N6TQS +1-510-655-8604 <faunt@panix.com>
Date: Tue, 27 Jan 2009 13:05:25 -0500 (EST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Far be it from me to criticize something in QST, but that thing is a foot
hazard.  It'd be better to have an external housing for the weight,
and if either sort of guide becomes misaligned for any reason, then it
could easily bind.  

73, doug

   Message: 4
   Date: Tue, 27 Jan 2009 08:05:28 -0700
   From: "W0MU Mike Fatchett" <w0mu@w0mu.com>

   Check out the latest QST.  There is an article about this subject.  The
   author uses a piece of pipe which has a concrete at the bottom.  He pounded
   in a ground rod and then slides the pipe with concrete on the bottom over
   it.  Looks pretty slick.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>