Towertalk
[Top] [All Lists]

Re: [TowerTalk] tower resonances

To: jimlux <jimlux@earthlink.net>
Subject: Re: [TowerTalk] tower resonances
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Fri, 13 Feb 2009 08:06:55 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
jimlux wrote:

> Most of the matrices I've done from actual measurements (by me, or 
> gleaned from others) have been asymmetric to a certain extent (that is, 
> Z23 != Z32), but it's mostly due to measurement and arithmetic problems.
> 
> That is, if you have a 3 element array, you'd expect a matrix like
> Z11 Z12 Z13
> Z21 Z22 Z23
> Z31 Z32 Z33
> where Z21=Z12, Z13=Z31, Z32=Z23
> 
> But you don't get that.

The true z-matrix will always be symmetric if the network is reciprocal.
All passive networks (not containing ferrite circulators) are 
reciprocal.  Therefore, matrix symmetry will not tell you
anything about whether a tower is radiating.  It is, however, a check on 
the accuracy of the measurements.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>