Thanks Joe..Tom N3ZC
----- Original Message -----
From: Joe - WDØM
To: mrlogs
Cc: towertalk@contesting.com
Sent: Wednesday, March 11, 2009 8:44 PM
Subject: Re: [TowerTalk] Pinning my mast in rotator clamp
Mine (G-1000 SDX) has been pinned for about 10 years...it survived 123 mph
wind gusts in Alaska, and here in CO, 90 mph gusts. Not a problem.
73
--
Joe Hannigan - WDØM
Pagosa Springs, CO
http://www.WD0M.com
http://www.pagosarocks.com
http://www.quiltqueen.net
mrlogs wrote:
Hi All..
My Yaesu G-1000DXA manual say's to drill thru the mast & put a bolt thru the
rotator & mast to keep it (the mast) from turning in the clamp. I was told to
do a survey here & get everyone's input on doing this as it might be a bad
idea..
Thanks for your input!
73'..Tom N3ZC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|