Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pier pin on Rotating Tower

To: phil@k3tuf.com, towertalk@contesting.com
Subject: Re: [TowerTalk] Pier pin on Rotating Tower
From: TexasRF@aol.com
Date: Mon, 21 Sep 2009 16:41:38 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Phil, if the rotator is located at the first guy level, the pier pin base  
or concrete base is ok. In this case, you might consider using the six guy 
torq  assembly at the first guy level to help absorb the twisting force there.
 
If you locate the rotator near ground level as is often done, the pier pin  
base is not an option unless you include a set of guys near the ground and 
who  wants to do that?
 
73,
Gerald K5GW
General Manager, Texas Towers
 
 
 
 
 
In a message dated 9/21/2009 3:15:35 P.M. Central Daylight Time,  
phil@k3tuf.com writes:

I am  planning a rotating 55G tower.  Understanding the current 
preference  to place a guyed tower on a pier pin baseplate, is this still 
true for  rotating the tower?
Thanks for input.
Phil  K3TUF
_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>