Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pier pin on Rotating Tower

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Pier pin on Rotating Tower
From: <john@kk9a.com>
Date: Mon, 21 Sep 2009 17:35:44 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If you are rotating the entire tower you would have a tower bearing at the 
base and the structure below the bearing would be in concrete.  If you are 
rotating only the upper part of the tower, then you could use a pier pin 
base.

John KK9A


To: towertalk@contesting.com
Subject: [TowerTalk] Pier pin on Rotating Tower
From: Phil Theis
Date: Mon, 21 Sep 2009 16:14:53 -0400


I am planning a rotating 55G tower.  Understanding the current
preference to place a guyed tower on a pier pin baseplate, is this still
true for rotating the tower?
Thanks for input.
Phil K3TUF 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>