Towertalk
[Top] [All Lists]

Re: [TowerTalk] Band Color Codes

To: Towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Band Color Codes
From: Jim CASSIDY <jc_ki7y@q.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Mon, 15 Feb 2010 15:55:10 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
There a re a couple of other wire label options.  3M and maybe others make wire 
labels that have a white surface to write info on and a clear portion of tape 
covers the writing to preserve it.
Another more inexpensive method is to use white electrical tape and mark with a 
Sharpie marker.  They last fairly well.
73

Jim Cassidy

KI7Y




> From: larryb.w1dyj@verizon.net
> To: towertalk@contesting.com; yccc@contesting.com
> Date: Mon, 15 Feb 2010 10:46:19 -0500
> Subject: Re: [TowerTalk] Band Color Codes
> 
> Interesting idea!
> 
> Since no current band has a 9 in it, you could substitute white for black 
> and go "EIA" -- this would cover the WARC bands:
> 
> 160M - brown, blue, white
> 20M - red, white
> 17M - brown. violet
> 12M - brown, red
> 6M - blue
> 23cm -- white, red, orange (the leading white indicates cm)
> 
> etc.
> 
> Of course, this could be tough for a multi-band antenna...
> 
> Actually, what I use now are the numbered wire labels that electricians 
> use -- you can find booklets of them in your local home depot, etc, in the 
> electrical dept.  Mine are called "Brady Porta-Pack Wire Markers" although I 
> don't know what the current brands would be as I picked these up about 50 
> years ago...  (One pack lasts a long time.)
> 
> 73 -- Larry -- W1DYJ
> 
> 
> 
> 
> ----- Original Message ----- 
> From: "Tony Brock-Fisher" <barockteer@aol.com>
> To: "Towertalk" <towertalk@contesting.com>; <yccc@contesting.com>
> Sent: Monday, February 15, 2010 9:50 AM
> Subject: [TowerTalk] Band Color Codes
> 
> 
> >I apologize if this may have been discussed before....
> >
> >
> > Thinking of standardizing on a set of color codes for bands on coax, 
> > switches, filters, etc.
> >
> > What's the best choice?
> >
> > I'm ruling out black as a choice, because black tape on black coax is hard 
> > to see.
> > I don't do WARC bands so they are not included in my choices.
> >
> > Some of my thoughts are:
> >
> > (sort of) EIA color codes:
> > first digit of band is resistor color code, with exceptions as noted
> >
> > 10-brown
> >
> > 15-green  (only band with a '5')
> >
> > 20-red
> >
> > 40-yellow
> >
> > 80-blue
> >
> > 160-orange (only bright color left)
> >
> >
> >
> > (or just simple mapping, in ascending order of frequency)
> >
> > 160-brown
> >
> > 80 - red
> >
> > 40 - org
> >
> > 20 - yellow
> >
> > 15 - green
> >
> > 10 - blue
> >
> >
> >
> > (and in order of wavelength)
> >
> > 10 - brown
> >
> > 15 - red
> >
> > 20 - org
> >
> > 40 - yellow
> >
> > 80 - green
> >
> > 160 - blue
> >
> >
> >
> >
> >
> > Or maybe there's a better, simple idea out there...
> >
> >
> >
> > -Tony, K1KP
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk 
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
                                          
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>