| To: | towertalk@contesting.com, ad6aa@sbcglobal.net |
|---|---|
| Subject: | Re: [TowerTalk] best way to free a thrust bearing set pin ( allen nut ) |
| From: | K7LXC@aol.com |
| Date: | Thu, 2 Sep 2010 18:52:23 EDT |
| List-post: | <towertalk@contesting.com">mailto:towertalk@contesting.com> |
In a message dated 9/2/2010 4:44:23 A.M. Pacific Daylight Time,
towertalk-request@contesting.com writes:
> Not all oil is created equal. Use actual penetrating oil. WD40 is
great, but
don't use it to free nuts.
Roger that. In WD-40, WD stands for water displacement. Great for
that, but not so great for a penetrating oil. Several good actual penetrating
oils out there.
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TowerTalk] Piece needed for 4BTV vertical, jpk5lad |
|---|---|
| Next by Date: | Re: [TowerTalk] Concrete testing, K7LXC |
| Previous by Thread: | [TowerTalk] Piece needed for 4BTV vertical, jpk5lad |
| Next by Thread: | Re: [TowerTalk] best way to free a thrust bearing set pin ( allen nut ), GALE STEWARD |
| Indexes: | [Date] [Thread] [Top] [All Lists] |