[Top] [All Lists]

[TowerTalk] 1980s Cushcraft A4

Subject: [TowerTalk] 1980s Cushcraft A4
Date: Sat, 01 Jan 2011 15:22:37 -0500
List-post: <">>

 I acquired a late 70 A4 off a friend late dad. The center of the driven 
element is a black insulated material about 2 inches in diameter that the U 
bolts mount to the boom. There are two 1/4 20 tapped holes that I assume were 
to mount the feed line. As you might have determined I do not have the 
instruction manual. Can I use two brass bolts to connect the feed line to? How 
are they making connection to the tubing? It evidently worked as this was up 
for almost 30 years. Thanks Mike


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>