Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: WHOLE HOUSE SURGE SUPRESSORS

To: Paul Christensen <w9ac@arrl.net>
Subject: Re: [TowerTalk] Fwd: WHOLE HOUSE SURGE SUPRESSORS
From: Jack Brindle <jackbrindle@me.com>
Date: Mon, 3 Jan 2011 13:11:04 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Wouldn't it be feasible to simply open up the existing three-way  
devices and remove the two legs that are undesired?
I note that the older power strips I have seem to all have failed MOVs  
that need to be removed anyway.

Jack Brindle, W6FB


On Jan 3, 2011, at 1:01 PM, Paul Christensen wrote:

>> Thanks Paul (and Jim).  I knew I had read about all this before,  
>> but...
>> So our choice is what basically?  Spend $200-700 per surge  
>> protector, or
>> use none at all?
>
> Pete,
>
> I would definitely install a whole-house SPD solution at the service
> entrance.  Then, only consider single-mode SPD devices (e.g.,  
> SurgeX) on
> branch circuits.
>
> Right now, I'm only using a whole-house protector.  All 3-mode MOV  
> devices
> previously used on my branch circuits were hauled away with the  
> trash.  I'll
> add single-mode SPD devices as time (and my budget) permits.
>
> Paul, W9AC
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>