Even better is a simple 'drag behind' device using a flat bed and a
spool support on top. Putting a small 'blade' on the bottom with a
curved aluminum tube to carry the wire through to the depth desired,
you could bury 1000's of feet of wire in a small amount of time.
Use cinder blocks on top of the device to keep it flat on the ground.
73
Don
N8DE
Quoting Adam Shirley WJ4X <wj4x@amsat.org>:
> Build yourself a miniature one of these:
>
> http://eastongrandrental.com/cable%20plow.jpg
>
> 73!
> -Adam
> WJ4X
>
> On 7/3/2011 8:44 AM, Dan Bookwalter wrote:
>> Ok , now on to my next question , what is the best way to lay these
>> radials down
>> using my riding mower ? As I will be running at least 5000 ft of radials
>> anywhere from 75ft to 200 ft long I would like to utilize my mower
>> to lay them
>> out and bury them too if possible.
>>
>> Suggestions ?
>>
>> Dan N8DCJ
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
