IT'S the common stuff the was used between the poles got it free and I need
to make up some phasing line for 80 4 square also 160 m 4 square that is why
I asked the group for help.
Thank you in advance
-----Original Message-----
From: Steve Maki
Sent: Friday, July 08, 2011 10:53 PM
To: towertalk
Subject: Re: [TowerTalk] want place to lookup alum cable tv hardline specs
On 7/8/2011 7:06 PM, Kevin Adam wrote:
> Wanted place to lookup alum cable tv hardline specs I have some 1/2
> and 5/8 Alum cable tv hardline looking for the velocity factor for
> these line anyone know where I can find them. Thank you in advance.
If it's standard foam hardline like Commscope P3 or QR the published VF
is usually .87. If it's "disc" hardline it will more resemble airline in
specs, .9 to .92 VF.
As was suggested though, it should be measured to be sure.
-Steve K8LX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|