Do the sections have to be glued? There's no pressure on them and they
usually have a pretty tight friction fit.
73, Vince K4JC
On Oct 24, 2011, at 10:51 AM, "Steve Jones" <n6sj@earthlink.net> wrote:
> I'm about to place a number of 150' Sched 40 PVC conduits between my
> shack
> and new tower. I want to end up with small 200 lb. stength nylon
> twine in
> each conduit, then use that small twine to pull through a larger
> 1/4" nylon
> rope for the actual cable pulls.
>
> Should I use a fish tape to pull through the small twine as I glue
> on each
> additional section of conduit? I'm concerned about the PVC cement
> sticking
> to the nylon twine. Or is there an easy way to install the small
> twine
> after a whole 150' run of conduit is completely glued together?
>
> 73,
>
> Steve
> N6SJ
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|