Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotator screw sealing.

To: caraj@cox.net
Subject: Re: [TowerTalk] Rotator screw sealing.
From: n8de@thepoint.net
Date: Tue, 27 Nov 2012 07:06:38 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I've used RTV silicone seal with great success.

Look for 'aquarium sealant' as it does not release acetic acid while curing.

73
Don
N8DE


Quoting caraj@cox.net:


Hi All:
Is there a sealer or some other recommended method to improve maintaining
rotator outside case screw tightness.
Checking my HAM IV after hurricane Sandy showed all four bottom rotator
screws 2 turns looser.
The commonly sold (red/blue) nut tightener available at Harware stores does nothing.
73,
John, K2SFS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk




_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>