To: | <towertalk@contesting.com> |
---|---|
Subject: | Re: [TowerTalk] Wire lubricant for cable pull thru conduit |
From: | "WK1W Ivan Shapiro" <WK1W@ivanshapiro.com> |
Date: | Mon, 25 Feb 2013 17:51:47 -0500 |
List-post: | <towertalk@contesting.com">mailto:towertalk@contesting.com> |
Dick: I bought lubricant for pulling at Lowe's in the electrical dept. We called it "slime" The pull I did thru 2 inch PVC was about 75' and had two 90 degree re-directs, one at each en d. I taped at each end but nowhere else, to give me "wiggle room" later on (i.e. pull back etc). I used rope and taped to the taped bundle at the pull end. With each pull I made sure there was a rope for next time, esp why I didn't tape the bundle. Hope this helps. Ivan 73 WK1W _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] Wire lubricant for cable pull thru conduit, Grant Saviers |
---|---|
Next by Date: | Re: [TowerTalk] Wire lubricant for cable pull thru conduit, Charles Lind |
Previous by Thread: | Re: [TowerTalk] Wire lubricant for cable pull thru conduit, Steve Jones |
Next by Thread: | Re: [TowerTalk] Wire lubricant for cable pull thru conduit, john |
Indexes: | [Date] [Thread] [Top] [All Lists] |