Re: [TowerTalk] Welding Rebar

Towertalk

Re: [TowerTalk] Welding Rebar

from [Ken]

To:	[email protected]
Subject:	Re: [TowerTalk] Welding Rebar
From:	Ken <[email protected]>
Date:	Sun, 05 Jan 2014 14:50:54 -0600
List-post:	<[email protected]">mailto:[email protected]>

   Why use Rebar at all.  I put 3 towers up using chicken wire and tie
wraps off bread wrappers.  So far only 2 have fallen down,

73, Ken


_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Welding Rebar, Ed K0KL Re: [TowerTalk] Welding Rebar, Roger (K8RI) on TT Re: [TowerTalk] Welding Rebar, Edwin Karl Re: [TowerTalk] Welding Rebar, Ken <= [TowerTalk] Fwd: Welding Rebar, Hans Hammarquist Re: [TowerTalk] Fwd: Welding Rebar, Roger (K8RI) on TT Re: [TowerTalk] Fwd: Welding Rebar, Wayne Kline [TowerTalk] screw anchors (was Welding Rebar), Hans Hammarquist Message not available [TowerTalk] Fwd: screw anchors (was Welding Rebar), Hans Hammarquist Re: [TowerTalk] Fwd: screw anchors (was Welding Rebar), David Blake Message not available [TowerTalk] Fwd: Fwd: screw anchors maintenance, Hans Hammarquist

Previous by Date:	Re: [TowerTalk] Tack welding rebar, K7LXC
Next by Date:	[TowerTalk] Fwd: Welding Rebar, Hans Hammarquist
Previous by Thread:	Re: [TowerTalk] Welding Rebar, Edwin Karl
Next by Thread:	[TowerTalk] Fwd: Welding Rebar, Hans Hammarquist
Indexes:	[Date] [Thread] [Top] [All Lists]