Towertalk
[Top] [All Lists]

Re: [TowerTalk] 80 meter dipole

To: "'Tom Osborne'" <w7why@frontier.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] 80 meter dipole
From: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
Date: Sun, 20 Jul 2014 23:02:49 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It looks like you have a lot of loss somewhere in the system, unless you
have a really long coax run.

If the run is only 100' or 150' then I don't think you would see such a flat
SWR curve unless either the coax is damaged or there is some other lossy
element in the system. 


----------------- Wes Attaway (N5WA) ------------------- 
1138 Waters Edge Circle, Shreveport, LA 71106 
                  --- 318-393-3289 (Cell) ---
        Computer Consulting and Forensics 
-------------- EnCase Certified Examiner --------------- 

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Tom
Osborne
Sent: Sunday, July 20, 2014 7:36 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 80 meter dipole

I recently put up a dipole for 80 and used some RG-6 CATV coax to feed 
it.  Good news is that I cut it for 3550 and the SWR is about 1.3:1 
there.  Bad news is that it stays pretty much the same all the way up 
the band.

Is the wide bandwildth because the coax is so lossy?  It is the double 
shielded stuff with 2-layers of foil and 1-layer of braid. 73
Tom W7WHY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>