Hi Dick,
I bought all of my stripping/crimping tools from Davis RF
<http://www.davisrf.com/index.php>. You do have to adjust the stripping
tools for the particular coax you are using, but once done they work. If
you switch to a different coax -- even of the "same type" -- you will have
to adjust any good tool.
73 -- Larry -- W1DYJ
-----Original Message-----
From: Dick, K2ZR
Sent: Wednesday, July 23, 2014 5:27
To: towertalk@contesting.com
Subject: [TowerTalk] Coax Stripping Tool For RG8X & Crimp Style PL259
GE,
Does anyone know of a good Coax Stripping Tool For RG8X & Crimp Style PL259?
There are plenty of Coax Stripping Tools For RG8X and solder style PL259s
but I don't seem to be able to find one for crimp style 259s
Thanks & 73,
Dick, K2ZR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|