Requires use of gloves, but I have used toilet bowl cleaner (caustic) for
this purpose, works real swell ...!
ed K0KL
On 8/2/2014 8:31 AM, Gedas wrote:
As much as I hate to admit it, at times I have been guilty of leaving
rotor cables or even coax outside unprotected from the rain and snow.
Later on, wanting to put it to some use and after stripping off some
insulation, I find that the surface of the copper conductors have been
tarnished with a nice black coating. The tarnish makes it impossible
to solder to even with an acid core flux. Other than physical
abrasion, does anyone have any tricks or solution/chemical that will
remove that tarnish?
Gedas, W8BYA
Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4744 / Virus Database: 3986/7967 - Release Date: 08/02/14
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|