I used some channel iron with an opening around 3 1/2 inches, just so it
enclosed the leg nicely. Way stronger than the original and if you change
your mind and want a different tower, you have enough strength there to
weld or bolt another kind of base to it.
73 Don
VE6JY
On Thu, Sep 4, 2014 at 9:50 PM, <ve4xt@mymts.net> wrote:
> Hi all,
> Anyone have any suggestions for subs for the stubs? Wade Antenna changed
> the leg profile slightly, so new ones, apparently, don't work, and I'm
> having trouble locating stubs with the old profile.
> It seems most older stubs are currently residing in concrete... including
> my old ones back at my parents' former home.
> Seems to me there's nothing magical about replacing the structural
> strength necessary to hold up the tower.
> This is a freestanding tower similar to, but more attractive than, Rohn
> BX. The stubs I need would attach to the DMX-106 (old part number) section.
> Anyone have any suggestions?
>
> Thanks
> Kellyve4xt
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|