Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cordless solder irons

To: jim.thom@telus.net, bigdon39@gmail.com
Subject: Re: [TowerTalk] Cordless solder irons
From: TexasRF--- via TowerTalk <towertalk@contesting.com>
Reply-to: TexasRF@aol.com
Date: Wed, 19 Nov 2014 11:38:49 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
A really frugal ham might make use of the rotator cable or coax for an ac  
extension cord. No exactly code but works in a pinch. Yes, I have personally 
 done that but would never tell anyone!
 
73,
Gerald K5GW
 
 
 
 
In a message dated 11/19/2014 8:26:57 A.M. Pacific Standard Time,  
jim.thom@telus.net writes:

IF the  tower is behind your home..running an extension cord up to the top 
is no big  deal.  A 40 watt weller might lose heat fast 
in a breeze, but a  100-150w .375 inch chisel tip might fair better.. a lot 
better. The .375 inch  solid tip is fairly long overall, like
3 inchs long, with half of it  embedded into the iron.  The massive tip 
will store a lot of  heat.   Plan B would be to put some tarp up
there..and get under  it..and outa the wind.  Easier said than done.  Plan 
C is to wait  till the wind dies down.  The even bigger irons use
a .5 inch diam  tip.   I have used my 100w outside in the cold, at base of 
tower....  but with no wind.  A 2 stroke gas gen set at the top of the
tower  would work too....but with my luck, Id either end up deaf, or set my 
self on  fire.   You wont get much V drop on a heavy duty extension  cord.

Jim  VE7RF   


From: Big Don 
Sent:  Wednesday, November 19, 2014 7:25 AM
To: Jim Thomson 
Cc:  towertalk@contesting.com 
Subject: Re: [TowerTalk] Cordless solder  irons

Soldering up a tower is a *LOT* different than in your  shop.  Any breeze 
at all just kills the heat.  This is based on many  battle-scarred years 
keeping quads happy using a propane torch...( hard to  keep lit ...and up 
50-100 
feet in the air is no place to set yourself on  fire  -- Don't Ask...)  If 
you want to do much with a soldering  iron, you will need some Serious 
Juice. 

Harbor Freight Tools currently  has on sale a 700-watt 2-cycle portable 
generator, weighs 38 pounds (no worse  than, e.g., a prop pitch).  Advertised 
to run 5 hrs at 50% duty, for  $99.00 right now.. Compact, has a nice handle 
on top, just tie a rope and pull  it up when you're ready to go....

73,  Don   N7EF


On Wed, Nov 19, 2014 at 6:43 AM, Jim Thomson  <jim.thom@telus.net> wrote:

Date: Tue, 18 Nov 2014  19:10:23 -0800
From: "Don " <w7wll@arrl.net>
To:  "Towertalk" <towertalk@contesting.com>
Subject: Re:  [TowerTalk] Some advice about crimp ;type coax connectors

Which  brings a question to mind. Why is there not available for sale a
decent battery powered soldering iron.[ -SNIP- ]
Anyone have  information on such a tool for use whilst up in the air??

Don  W7WLL

_______________________________________________



_______________________________________________
TowerTalk  mailing  list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>