Hi Patrick
Don't think I'd cut them in half.
I'd just cut the plugs off and replace them and check the cable again.
Might be something in the plugs that are bad and you would be wasting a
bunch of cable.
If still bed, then start cutting them. 73
Tom W7WHY
On 12/15/2014 8:09 AM, Patrick Greenlee wrote:
I'm going to cut the bad jumper in half and test the halves and then
cut the bad piece in half and test those pieces. Whichever is bad
will then be dissected carefully to see, if possible, what was
physically wrong with the coax. This is a real head scratcher for
me. The good news is I'm back on the air with a pan adapter full of
signals again and loving it.
Patrick NJ5G
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|