On Wed,2/25/2015 8:11 PM, Hans Hammarquist via TowerTalk wrote:
I would be interesting to know if it is possible to design a special balun that can
balance the two unequal parts of the OCF with a "no common mode current" in the
feed line but still with a galvanic connection to avoid static build-up.
Sure. k9yc.com/RFI-Ham.pdf has a bunch of simple designs. It's called a
common mode choke. To confuse people, some call a common mode choke a
current balun. BUT -- most commercially available "current baluns" are
pretty poor.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|