Ditto to what John said....
Used my loos gauge on my 1/4 EHS 5/16 EHS Phillystran and Fiber Rod
guying material ,and in each case the loos gauge readings on steel or on the
nonconductive guy material were minute in there deference
Wayne..
> Date: Thu, 28 Jan 2016 11:40:24 -0500
> From: john@kk9a.com
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] I think it might be worth investing in a guy
>
> For the fun of it once I put my Loos gauge on Phillystran instead of the
> EHS leader and the tension reading was not much different, even though the
> EHS is considerably stiffer. I feel that it is more than accurate enough
> for guy wires.
>
> John KK9A
>
>
> To: towertalk@contesting.com, grants2@pacbell.net
> Subject: Re: [TowerTalk] [Bulk] Re: I think it might be worth investing
> in
> a guy wire
> From: K7LXC--- via TowerTalk <towertalk@contesting.com>
> Date: Thu, 28 Jan 2016 10:36:39 -0500
>
>
>
> As you tension a material, it becomes more rod-like. At the desired
> tension they all looked the same to the Loos - a very handy and reasonably
> priced tool.
>
> Cheers,
> Steve K7LXC
> TOWER TECH -
> Professional tower services for amateurs
> Cell: 206-890-4188
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|