Towertalk
[Top] [All Lists]

Re: [TowerTalk] 6 x 2 unit...

To: "reflector Towertalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] 6 x 2 unit...
From: "Dave Hachadorian" <k6ll.dave@gmail.com>
Reply-to: Dave Hachadorian <k6ll.dave@gmail.com>
Date: Mon, 18 Apr 2016 08:24:04 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I used the Dunestar Triplexer for a while, and it worked great, not a trace of interference between bands at the 100 watt power level.

Now I have the 4O3A Triplexer System, and it works fine at 1500 watts:
http://www.force12inc.com/products/complete-hf-20-15-10-meter-14-21-28-mhz-triplexer-system-by-4o3a.html

Dave Hachadorian, K6LL
Yuma, AZ


-----Original Message----- From: Douglas Ruz / CO8DM
Sent: Monday, April 18, 2016 7:13 AM
To: john@kk9a.com ; towertalk@contesting.com
Subject: Re: [TowerTalk] 6 x 2 unit...

I have been thinking about a Triplexer to share my Tribander with both
radios...what Triplexers do you suggest ?

-----Mensaje original-----
De: TowerTalk [mailto:towertalk-bounces@contesting.com] En nombre de
john@kk9a.com
Enviado el: lunes, 18 de abril de 2016 7:22
Para: towertalk@contesting.com
Asunto: Re: [TowerTalk] 6 x 2 unit...

Unless you are going to invest in a triplexer, two band pass filters and a SO2R controller having a 6X2 or 4X2 unit will be of little benefit.

John KK9A

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] 6 x 2 unit...
From: "Ed Sawyer" <sawyered@earthlink.net>
Reply-to: sawyered@earthlink.net
Date: Mon, 18 Apr 2016 06:17:21 -0400

A few words about this relative to SO2R. You only need a full 6 x 2 if you have monoband antennas. If, for instance you have a tribander, a 40/80 vert, and an inv L on 160, then you only have a need for 3 slots. Same with a band decoder. So you should start by mapping out the planned antenna configurations and then decide. Also, how fae is the base of the tower from the shack? If the tower is pretty close and there are not 6 antennas out there, a simple manual switching system could work fine - properly labeled.



The YCCC (www.yccc.org) has a SO2R box kit. There may be others. The issue
is obtaining all the parts.



MFJ sells a manual 2 x6 switch which could make sense if the tower is right on the other side of the wall from the station set up or if the tower is
directly on the roof above.



73



Ed  N1UR

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>