Towertalk
[Top] [All Lists]

Re: [TowerTalk] RG-304 for CMC ?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] RG-304 for CMC ?
From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Sun, 24 Apr 2016 13:07:22 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Center conductor is silver plated copper strands with a steel core which I'd never seen before.

73

Roger (K8RI)



On 4/24/2016 Sunday 1:03 PM, Jim Thomson wrote:
## It looks like 304 is .280 OD.... which Im sure is bigger than 8X (.249) It appears the center conductor on 304 is 1.5mm = .059 inch = 14.5 gauge wire. The center conductor consist of silver plated steel ! Solid too, not stranded.
Never heard of silver plated steel being used b4.

Jim  VE7RF


-----Original Message----- From: Peter Voelpel
Sent: Sunday, April 24, 2016 9:46 AM
To: 'Jim Thomson' ; towertalk@contesting.com
Subject: RE: [TowerTalk] RG-304 for CMC ?

Its much smaller then RG-8X, but a little larger then RG-142.


http://www.caledonian-cables.co.uk/Coaxia_Cable/M17_RG/RG304.html

73
Peter, DJ7WW





-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
Thomson
Sent: Sonntag, 24. April 2016 18:36
To: towertalk@contesting.com
Subject: [TowerTalk] RG-304 for CMC ?

Does anybody know anything about RG-304 ? Its aprx .271 OD.... and has
teflon  + silver braids /center conductor.
Im having a helluva time trying to find out what gauge the center conductor
is.  Does anybody know ?
I think 304 is sorta the teflon version of RG-8X, and aprx the same OD.


If you can wind RG-58 and also possibly RG-8X onto a stack of torroids,
then there should be no issue using RG-304.

IF 304 has a bigger center conductor than 303 /400 coax, then it might be
an excellent candidate for applications
where a high powered CMC is required.     RG-393 is .392 OD.... slightly
less than the .405  found on 213-U.

I'm looking for a possible alternative to 393, but cant find any V rating,
power ratings  or attenuation charts for 1-54 mhz...for  304 coax.

I have also looked at some of the plenum rated small coax, but the price is
sky high...and difficult to locate in small  qty.

Jim   VE7RF
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


--

73

Roger (K8RI)


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>